Affordable night sights

Discussion in 'Other' started by gatopardo, Aug 28, 2010.

  1. gatopardo

    gatopardo New Member

    30
    0
    0
    Weather resistant, super bright, super dense formula embedded in industrial grade weather resistant medium.
    visit: http://glow-on.com/index.html
    Glow-On™Super Phosphorescent is a high density formula, extremely luminescent, created to be a long lasting, cost effective, weather resistant durable and efficient water based luminescent medium for multiple applications.

    -It's the most affordable phosphorescent pigment in its class.
    -One vial is enough for 25 pistols or a dozen fishing lures.
    -Long afterglow: It glows for up to 12 hours.
    -Glow-On™ is ten times brighter than similar products.
    -Glow-On™ is easy to apply, it does not need a primer or base due ti its high density.
    -Water based: Glow-On™ is easy to clean before it dries, unlike oil based products which are smelly and messy to deal with.
    -Environmentally safe: Glow-On™ is non-toxic, non-radioactive, non-flammable.
    -Glow-On™ Phosphorescent capabilities will last for at least 10 years. Excitation and emission can be repeated indefinitely.
    -Super concentrated: Our phosphorescent formula is the brightest formula available.

    "This technology offers up to 10 times better brightness than previous zinc sulfide based materials."( Wikipedia )

    Easy to apply, it will resist any weather.

    Glow-On™ Super Phosphorescent Paint single vial with instructions and 2 applicators,
    starts at US$ 9.89 plus S&H US$ 3.42

    Glow-On™ Super Phosphorescent Paint single vial with instructions and 2 applicators
    plus Self Adhesive material only US15.89 plus S&H US$ 3.42[/b]


    [​IMG]

    For the months of August and September, with every purchase of Glow-On™,( single vial or single vial plus self adhesive) members of this forum and visitors to this page will receive an extra appreciation package with ten squares and two small strips of Glow-On™ Self Adhesive at no extra cost to use on at least ten rear sights, or a couple of remote controls etc.

    http://glow-on.com/purchase.html
    [​IMG][​IMG]
    Some examples
    [​IMG]
     
  2. gatopardo

    gatopardo New Member

    30
    0
    0
    Luminous gun sights paint for a backyard scan.

    Default Luminous gun sights paint for a backyard scan.

    Haven't used my glow on for a while and now when I go to use it I see that
    it has hardened quite a bit in the bottle. Can I loosen it up with some water or
    something else?



    This happens as the water content in the small bottle evaporates and the mix seizes , which it's intended to do while it dries.
    This happens to any kind of paint over a period of time, specially if the jar, can, vial, is very small or if the amounts of paint are very small.


    To solve this issue we just add a couple of drops of water and the mix will re-acquire the paint consistency, that is creamy.
    -------------------------------------------------------------------------------------------------------------------

    On a different note, yesterday we installed new security lights and cameras outside a friends house and we took some photos with a couple of sidearms. We were trying to simulate what our Glow-On enhanced gun sights would look while we scanned the area.

    Of course in the presence of bright light Glow-On initial glow is not incredible. In any case, we were happily surprised to see our product performing very well while we walked for several minutes around the area.
    Needles to say, we exposed the gun sights to the small 6 LED pocket flashlights we all carry in our pockets. But, only for a period of about five seconds.

    [​IMG]
     

  3. gatopardo

    gatopardo New Member

    30
    0
    0
    Can you keep reviving the glow with an led flashlight indefi

    The glow cycle can be repeated millions of time for a period of about ten years. 3-5 seconds of light exposure are enough to get you going
    When exposed to daylight the response is almost instantaneous. In fact the material is always glowing but its glow is only perceived when one moves to a shady area or one enters a building.

    Find Glow-On at:
    glow-on.com
    Amazon.com
    eBay


    [​IMG]
     
  4. gatopardo

    gatopardo New Member

    30
    0
    0
    Could you tell me which color has the best visibility day an

    I'm particularly partial to yellow and green, if you want to have a day color on your sights.
    That is, in daylight it looks yellow or green Vs. the greenish white which the Glow-On original shows.

    [​IMG]
     
  5. gatopardo

    gatopardo New Member

    30
    0
    0
    Glow-On: "A must have for gun owners"

    Yes, please calculate the price plus the shipping cost using our purchase page here .
    Choose the product you are interested in.
    click on the "add to cart" button and you'll be taken to the PayPal shopping cart.
    Enter your zip code and click "calculate"
    Now you know the total of the purchase.
    At the bottom of this page there is a PO Box address where to send your money order.

    Now, this is especially true for gun owners whom like us, have a collection of firearms:
    Glow-On is a must have for gun owners. If you have a number of firearms, chances are you'll find it helpful for things like a nocturnal varmint inventory liquidation program or such.
    Which, I'll say it, is hopefully the most action our firearms will see besides the gun range.

    [​IMG]
     
  6. Road Rat

    Road Rat Member

    231
    0
    16
    DANG, kind of expensive stuff!!!!!!!!!!
     
  7. gatopardo

    gatopardo New Member

    30
    0
    0
    Respectfully and generally speaking, things are expensive if one doesn't have them when one needs them.
    In other words, things that cannot be bought with money are expensive.

    However I throw this over the table for consideration:

    [​IMG]
     
  8. gatopardo

    gatopardo New Member

    30
    0
    0
    Glow in the dark gun sights paint question


    A bit of troubleshooting:
    -The paint was mixed well before I used it, the solids tend to go to the bottom.
    -Is the application thick enough? The dot on the cap of the vial is a good comparative point.
    - To remove the paint, the easiest way is to pry it off with a plastic tool, fork, utensil, etc (not metal as it will scratch the finish on your firearm).
    If the paint has been for a few months and it's very hard, use a cotton swab and a bit of nail varnish remover, touch the paint a couple of times. This will soften it and then rub it off. do this carefully, acetone will affect the finish on plastic pieces/parts of your gun and/or some finish. True blued finish will not be affected.

    From our website:

    For how long will it glow after full exposure?

    Full charge can be achieved in a few seconds under a small LED flashlight.
    Under daylight, this happens almost instantaneously.
    Under daylight, Glow-On constantly emits and reflects light, making the transition from illuminated to dark areas very smooth.

    The afterglow duration time is 1200 minutes until decay is complete (as tested at the laboratory).
    This means the phosphorescent activity ends completely at that time. To the human eye it is perceptible 5-7 hours, depending on individual sensitivity.

    The initial glow is very bright, brighter than tritium, and it starts to decay slowly for hours. If you have good night vision (natural human eye adaptation to the dark) the glow will be clearly perceived by you all night long, even if it is faint.
    A couple of seconds under a led flashlight will revive the glow to its fullest.
    This cycle can be repeated millions of times during the life of the product which is about ten years.
    [​IMG]
    Home Page | Products | Advantages | Gun Sights Paint | Fishing Lures | Electronics | Stars Paint | Bead Work | Nail Art | Steel Bracelet | Tips & Support | Gallery | Video Tutorials | Purchase | Contact Us | Site Map
     
  9. gatopardo

    gatopardo New Member

    30
    0
    0
    Paint has the tendency to dry up in very small containers. The change in humidity, temperature and atmospheric pressure will dry your paint inside the small vial.
    To counteract this tendency:
    Add a few drops of water at a time and stir until it recovers its creamy texture. If it's completely dry, a new vial is in order.


    How to take care of your paint:
    After every use, add some clean water on top of the paint left inside. Don't mix it at this point, just close the vial and sore it standing on its base .
    Next time you use it, spill the excess of water, stir again and you are ready to paint.

    Done this way, your small vial will last for a long time.


    Glow-on will not come off your clothes. Wash immediately with soap and water.

    Find Glow-On at:
    glow-on.com
    Amazon.com
    eBay


    [​IMG]
     
  10. gatopardo

    gatopardo New Member

    30
    0
    0
    Enhance your gun sights with Glow-On.
    If you haev a piece dedicated to varmint control, put Glow-On to the test.
    For the price of a fast food meal
    You can find it here:

    Find Glow-On at:
    glow-on.com
    Amazon.com
    eBay

    We ship fast
    [​IMG]
     
  11. gatopardo

    gatopardo New Member

    30
    0
    0


    Glow-On has a bit of tooth after it dries. It becomes evident after a few days when the synthetic media shrinks around the glow particles which have different sizes.
    It feels a bit like sand paper.
    The transparent nail varnish adds a very smooth surface which will not hold dust, or gun powder particles. In fact all one has to do is to rub a paper towel over it and the sooth is gone.

    There are options, nothing below the US30.00 mark is better than a good quality vial of nail polish ( US3.00-5.00 )

    Find Glow-On at:
    glow-on.com
    Amazon.com
    eBay





    [​IMG]
     
  12. gatopardo

    gatopardo New Member

    30
    0
    0
    A question for Glow-On

    The small strips and squares were phased out by he self adhesive sheets we are shipping with some our products.

    So now one gets a bit more than before at the same price.
    We are constantly trying o improve our products looking for better materials and as a consequence our paint is 20% brighter than it was originally.

    We are producing blue paint at the present, the blue glow sheet is in the plans

    Before:
    [​IMG]

    After:
    [​IMG]
     
  13. gatopardo

    gatopardo New Member

    30
    0
    0
    How heat resistant is the original glow-on?

    Thanks for such interesting question. In fact we've tried something similar with small LED lamps.
    Glow-On Original will stand the temperatures of the sights mounted over a hot barrel.
    I think, however, that the temps on a headlights lamp will be too high if the paint is too close.
    I any case a bit further away from the lam should work and it will create a real cool effect.
    Here are a few photos to illustrate the effect on a small LED lamp:

    [​IMG]


    A small tutorial is in order, I'll oblige later today
    Find Glow-On at:
    glow-on.com
    Amazon.com

    eBay
     
  14. gatopardo

    gatopardo New Member

    30
    0
    0
    Glow-On: If like me, you having problems reading small text.

    For the last couple of year I noticed a couple of tendencies befalling me. The first one is the difficulty to focus on small text when I'm reading. The second one which is a consequence of the first one it the tendency to constantly check reading glasses when I go to the store to see if my vision improves, should I decide to purchase the aforementioned devices, which I won't because I have to admit I'm still on denial about the whole thing.

    In any case, this situation translates into extra time trying to focus on my gun sights, especially the ones with small 1/16" little dots.
    To remedy this, I use Glow-On to make those dots bigger and the self adhesive to cover whole sights like the photo below. The result is a bit unorthodox, but I'm not a purist, life being as eclectic as it is, I don't have a choice.

    So if you guys are in the same boat:
    Make the markings bigger, it helps.
    And since there is no need for a white base coat before the luminescent paint application, the process is absolutely painless.

    Find Glow-On at:
    glow-on.com
    Amazon.com
    eBay

    [​IMG]
     
  15. gatopardo

    gatopardo New Member

    30
    0
    0

    Good news and good to hear from you dear friend, is good to know things are working out for you, please don't hesitate to contact me if you need Glow-On for you or your pals, I mean it


    On the other side of the spectrum :

    Inside of every pecan nut there is a nice treat, or a Pecan tree full of treats.

    Fact is, very few things will work right from the get go. Like a pair of new boots, one has to figure it out

    It takes awhile to figure out how this paint will work for you.
    In a world of instant gratification, we are used to instant gratification. Even seemingly instant gratifiers like lasers and red dots will take some time until one can match the mark with the shot.
    Glow-On is old school and as such it requires some time to "discover it".

    True the initial glow is so strong that can be disheartening to see it fading away.
    However, the initial glow is just that, initial glow, it will level to a faint glow which is where this product excels and in deep darkness it hard to beat because it will not negate you natural adaptation and night vision.


    The big surprise is really how well Glow-On performs during the day hours, easing the transition between sun lit areas and shady areas. An this is because Glow-On "glows" during the day too.

    So if any of you run one of those tracks where you move from one position to another and shoot, and one of the stops is coming from under a car, from inside a drain duct or such, give Glow-On a try.

    Find Glow-On here:
    glow-on.com
    Amazon.com
    eBay

    Now this post wouldn't be complete if I don't paste a good picture of our product, so, here it is:


    [​IMG]
     
  16. gatopardo

    gatopardo New Member

    30
    0
    0
    Thousands of firearm enthusiasts have added Glow-On as one more piece in their arsenal.
    Glow-On is very easy to apply and is super affordable.

    With sipping and handling is less than fourteen dollars and we offer 100% money back guarantee.
    So what's to lose?

    If you like it, lease let us know, we appreciate that.


    [​IMG]



    Find Glow-On at:
    glow-on.com
    Amazon.com
    eBay
     
  17. gatopardo

    gatopardo New Member

    30
    0
    0
    You and me both, those 1/16" dots are tiny and trying to align them translates more often than not, in a few inches off mark at 15'.
    Let me be clear , we are not talking self defense here, self defense is as close as it gets, as scary as it gets, and the sights are for the most part superfluous.
    We are talking range shooting.

    Now, the making of dots is time consuming, that's why the guys who sell the dots offer just a few for the same price of a small vial of Glow-On.

    Here is the solution: We make the dots over our gun sights with Glow-On. A white field (white dots, white paint , etc.) will help as it reflects the glow.



    [​IMG]


    Find Glow-On at:
    glow-on.com
    Amazon.com
    eBay
     
  18. gatopardo

    gatopardo New Member

    30
    0
    0
    Glow-On gun sights paint is easy to apply

    Glow-On gun sights paint is easy to apply
    On the pictures below one can get the idea about how volumetric Glow-On is when it's been applied to a set of gun sights.
    A thin application might not yield the best results.

    Find Glow-On at:
    glow-on.com
    Amazon.com
    eBay

    [​IMG]
     
  19. gatopardo

    gatopardo New Member

    30
    0
    0
    Yes it can be done...with Glow-On

    The vast majority of firearms sold in the USA come equipped with standard sights. Nothing special, it's either white dots or mil specs bare iron sights.
    If one wanted d to customize the sights, it'd involve the expense of buying a new set and paying a hefty chunk to a specialist to get the job done.
    We at Glow-On offer to put in the hands of every gun owner in the USA the possibility, if even modest, to create the favorite configuration one desires on any pistol sights available, new and old.

    Tiny dots? Make them bigger
    No dot? No problem put some dots on.
    Cover the whole sight back and front if you so desire.
    Because it can be done. With Glow-On.

    [​IMG]

    Find Glow-On at:
    glow-on.com
    Amazon.com
    eBay
     
  20. gatopardo

    gatopardo New Member

    30
    0
    0
    Glow-On is an improvement.

    Most everything in life can be customized.
    Most custom works are about improving over something already established.
    It's true one could just replace ones gun sights with tritium, a scope, a laser.
    But, what if one just can't?

    Well, I'm here to tell you, it can be done with Glow-On.\

    What if, at one point in time you need to align a shot and you need to improvise?
    What if Glow-On is already there for you? On your sights.

    I'm not promising you are going to love it, (some do), or you are going to need it or use it every time.
    it is nonetheless, an improvement.

    If it's not for you, no problem let me know and I'll reimburse your payment, no questions asked.
    [​IMG]
    Thousands are already using it.
    If you'd like to have some, come and get it here.

    Find Glow-On at:
    glow-on.com
    Amazon.com
    eBay
     

Share This Page