Pistol World Forums banner
1 - 1 of 2 Posts

· Registered
19 Posts
Discussion Starter · #1 ·
A different lube can also cause different degrees of leading. Has there been a change there? Also, in low velocity rounds leading is often caused by too hard an alloy which allows the gasses from firing to pass the bullet in the barrel depositing lead on the rifling because the bullet does not expand to seal the bore. Metal prices have been all over the map lately, so a change in alloy could be the culprit.
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.