Pistol World Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi Y'all
I've loaded @100 rounds of 9mm Luger on my Load Master but had one primer cocked out of that first run. How do you remove the primer safely to save the brass?
Thanks for any assistance Yours in service
James Acerra

GUN CONTROL is HITTING your TARGET
 

Attachments

·
Registered
Joined
·
149 Posts
just deprime it as you would any other brass. however, i remove/cover all powder and put on some hearing/seeing protection first. i also, slowly, deprime. ive never had one go off.
 

·
Registered
Joined
·
3 Posts
...ANYTIME YOU HAVE AN UNFIRED PRIMER TO REMOVE....SOAK IT IN WD40. I either spray it into the case and let it set over night OR put some WD40 in a small cap and soak the brass in it over night. This will kill any chance of a bang. Reuse the WD40 by putting it into an old medicine bottle (clearly MARKED WD40). As you get an unfired primer just drop it in for an over night stay. DO NOT JUST DEPRIME!!!
 
1 - 4 of 4 Posts
Top